 |
|
|
|
|
 |
|
|
 |
|
| Built to conform to FCC requirements,
this comprehensive range of jacks is manufactured in both single and
multiple gang styles. The 4, 6, 8 and 10 way housings are available
shielded or unshielded and with either through hole or SMT PC tails.
Designed to mate with standard telephone receiver and line cord plugs,
applications include voice and data outlets, telephones, modems, medical
equipment and personal computers. |
 |
|
In accordance with Universal Serial
Bus Specification Version 1.00, this range of USB receptacles includes
series A surface mount, through hole and dual port variants and series
B right angle through hole formats. Originally designed to replace
the various input and output interfaces used on personal computers,
USB connectors are now used as standard interface devices in a multitude
of applications. |
 |
|
|
|
|
|
 |
|
|
 |
|
| Manufactured in high volume for the
personal computer and telecomms markets this high quality commercial
range of D sub miniature connectors is available in all popular configurations.
Complimentary boardlocks, threadlocks, board spacers and other accessories
enable the total solution to everyday input/output requirements. Dual
port, ferrite and high density versions are also available as standard
for more demanding applications. |
 |
|
A quality range of right angle PCB
sockets with metal front shells, boardlocks and front face fixings.
In 14-50 way sizes, all sockets include bail locks as standard.
SCSI Centronics
Designed as an industry standard computer interface, these connectors
provide the ideal solution where space is limited and high performance
is required. The range is available in 20-120 way, with nickel plated
shells and mini Centronics mating interfaces. Typical applications
include printers, personal computers and networking cards.
SCSI II D Sub Miniature
AConforming to ANSI standards this SCSI II connector is available
in 20-120 ways. It features nickel-plated shells and selectively gold
plated contacts. |
 |
|
|
|
|
|
 |
|
|
 |
|
| This range of power jacks is available
in 5 different pin diameters from 1.45mm up to 2.5mm. The standard
mouldings are UL94V-0 rated and can be shielded if required |
 |
|
Circular mini DINs from GTK meet
all the dimensions and functional requirements of DIN standards 41524
and 45322. The range is fully polarised and available in 3-9 way,
shielded or unshielded, straight or right angle mount. Panel mount
versions are available in 3, 4, 6 and 8 way |
 |
|
|
|
|
|
 |
|
|
 |
|
| The PC99 design guide was developed
to simplify the multitude of connections utilised on standard PCs.
GTK offers a full range of colour coded connectors including D sub
miniature and mini DIN connectors for PC99 applications or similar
requirements where clear colour coded identification is needed. |
 |
|
GTK's DIN 41612 connectors include
industry standard dual and triple row receptacles and headers in B,
C, Q and R configurations with circuit sizes 8 to 96 way. A 64 way
IDC version accepts standard 0.050'' flat ribbon cable. |
 |
| |
|
|
|
|
 |
|
|
 |
|
| A complete range is available with
contact pitches of 1.27mm, 2.0mm and 2.54mm and pin counts of 1-120.
Connector configurations are single, dual and triple row with straight,
right angle or surface mount options. Mini jumpers are available in
2.54mm with 2-10 contacts for simple programming. |
 |
|
Single or double row housings are
available with a contact pitch of 1.27mm, 2.0mm or 2.54mm, comprising
straight or right angle with up to 100 contacts. Surface mount or
through board contacts are also available. |
 |
|
|
|
|
|
 |
|
|
 |
|
| This low profile design features
10-100 contacts and centre slot polarisation. Full or selectively
plated gold contacts are available in either straight or right angle
versions. |
 |
|
Available in both 1.27mm and 2.54mm
pitch, these industry standard PCB headers have 10-100 contacts. Centre
slot polarisation and both long and short latch versions are available.
|
 |
|
|
|
|
|
